Fastest real world speed – Real World Speed measures performance for typical consumers. What is single core integer speed? Back to Contents Page Do not route card cables over or behind the cards. Press in on the tabs on each side of the drive and slide the drive up and out.
|Date Added:||11 November 2005|
|File Size:||46.90 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If you are installing a microprocessor upgrade kit from Dell, discard the original heat sink.
What is the GeekBench single core score? If your computer’s hard drive does not have a shroud, proceed to the next step. Release the card-clip lever, ensuring that motherboad tab on the card-clip lever fits into the notch on the front end of the card. Get to Know Us.
Chassis hooks may hold the cable in place inside the chassis. Page of Go. If you are replacing an adapter, remove the current driver for the card from the operating system.
Open the cover to a degree angle and release the insert tabs from inside the computer. Removing the Del Board 1 interposer board 3.
Make sure that the riser board is fully seated in the connector on the system board. See how consistently different CPUs perform with varying real world conditions. Trademarks used in this text: See offer for details.
Replace the battery only with the same or equivalent type bx260 by the manufacturer. Ensure that the two metal hooks and tabs are securely in place.
Press in on the tabs on each side of the drive and slide the drive up and out. Open the computer motgerboard slowly to prevent damage to the system cables. Slide the chassis intrusion switch out of its slot and remove the switch and its attached cable from the chassis. Press the inserts motherboxrd they pop free of the front-panel cover. Small Mini-Tower Computer 1.
Disconnect the floppy-drive cable from the system board connector DSKT. Doing so reduces the potential for personal injury or shock.
We calculate effective speed which measures real world performance for typical consumers. Remove the padlock from the padlock ring, if present. You can find more details here: ComiXology Thousands of Digital Comics.
Connect the interposer board to the floppy drive. If you are not installing a microprocessor upgrade kit from Dell, reuse the original heat sink when you install deell new microprocessor. Page 77 Lay the heat sink down with the thermal solution facing upward. To avoid damage to the drive, do not set it on a hard surface.
Transfer components from the existing system board to the replacement system board. Page 56 Ensure that the rail tabs are positioned at the back optipplex the hard drive. Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.
Table of Contents Add to my manuals Add.